Hobby Zone Modular System Review Part 2

Continuing from where we left off with Part 1 if you did not get the chance to see it that can be found Here 

Corner Shelves Module

This module was straightforward to make.

  

Corner Bottles Module

This module could be tricky because of the lack of surface to apply pressure when making them.

Corner Paints Module 26mm/36mm

With this one you may find the same issue as the bottle shelf.

Ending Corner Drawers Module

These are a good one to start with to get you into making the modules as they are a smaller version.

Ending Corner Shelves Module

Maybe the easiest ones to make in the set.

Paints Module 36mm/26mm

This is the final module and simple to put together.

Conclusion

The Module system is an amazing product in its self but I feel that the magnets that are something that when you read about it, think Wow, that's good, but is not as good in practice and more of a downside as it is at the moment because depending on how many modules you are getting and the order you want to put them in its more trouble than it's worth to get the magnets round the right way due to the push and pull thing. This could be fixed with color on the magnets a sort of red and green end or maybe they come already in the peace also because the magnet had to be hammered in on some of the less solid pieces like the sides to the bottle rack above, there was some slight damage to the other side, seeing as its MDF so I decided after the first few and then finding out that one magnet was ok but the other was off to just leave them all out and when I am done to glue it into place later.

But all in all I am extremely pleased with it even with the issue with the magnets and would highly recommend them. 

If you Have any questions about the modules and I will be more than happy to answer them below.